ARBOR PRESS PLP1
Manufactured and designed in the UK, the Clarendon Arbor Press is ideal for general bench presswork where no specific tools are required. This hand operated 0.35 ton press can be used for staking, riveting, installing and removing bearings and other press fit work.
Our range of Arbor Presses have been designed and manufactured in-house with sturdy cast iron bodies and rack and pinions machined from high-grade steels. These precision manual presses will stand the test of time, lasting for decades in any harsh workshop environment.
Arbor Press Features:
- Four position rotary table for varied component location
- Four models in the range delivering up to 850kgf pressing power
- The PLP3XT offers an extended throat of 305mm to cater for large diameter components
|Throat Depth (Max) mm||67||105||150||305|
|Capacity Over Table mm||105||190||275||300|
|Largest Table Slot mm||25||30||50||50|
|Load Ratio||14 : 1||30 : 1||34 : 1||30 : 1|
|Ram Diameter mm||22||30||44||44|
|Ram Length mm||175||305||440||440|
|Lever Length mm||130||380||570||570|
|Base Dimensions mm||230 x 100||420 x 150||470 x 210||620 x 205|
|Max Pressure Kgf||350||750||850||750|
|Nett Weight Kg||7||32||65||68|
Particular attention must be given, by the end user, to any mandatory local or national requirements, especially those relating to grinding wheels; the protection of eyes and control of substances hazardous to health.